Web shop

Services

Leak detection

Measure and Monitor

Instruments

Consumption meters

Dew point sensors

Residual oil sensors

Multimeters

Optimization

Software

Accessories

Filters

Air filters

Vacuum filters

Couplings

eSafe couplings

eSafe nipples

eSafe multilink

Stream-Line

Blowguns

Hose and reels

Condensate

Condensate drains

Oil/water separators   • Models
  • Accessories

Oil-waterseparator

Oil-waterseparator with sterling filter medium

Suitable for compressors up to 11 kW (max. 1,6 m³/min). Developed for legal and efficient disposing of compressed air condensate coming from 'small compressors' against lowest possible costs.

EachQuantity
AT0S060ST1With sterling filter medium149.00

Oil-waterseparator with sterling filter medium

Suitable for compressors up to 11 kW (max. 1,6 m³/min). Developed for legal and efficient disposing of compressed air condensate coming from 'small compressors' against lowest possible costs.

The used sterling filter medium will make the Ants OS-60 a "giant" with a capacity out-performing oil-/water separators 4 times its size.

It's pure simplicity to install and replace. Just fix the permanent back plate to a wall or cabinet, insert hoses in the two push-in fittings and it starts to separate. Oily water in; clean water out. Discharge straight to the sewer (as low as 5ppm oil-in-water).

At the end of its service life, release the hoses from the push-in fittings, attach the clip-on lid and plug (provided with the replacement unit) and slide it off the wall plate. Sealed, outwardly clean and ready for disposal, in accordance with the legislation regarding disposing waste.


Art. Ref.
AT0S060ST1

Technical information

Compressor capacity: Up to 60cfm (1,6 m³/min)
Service life: 5.000 hours at 1.600 L/min. or once a year**.
8.000 hours at 800 L/min. or every second year**.
Dimensions: 145 mm x 145 mm x 220 mm
Mounting: Wall or cabinet mounting (re-useable plate provided)
Hose diameter: 6 mm hose outer diameter
Hose Connection: Push-in connections
Disposable: Clip-on cap and blanking plug seal the retained oil inside the cleaner for transit.